1. Messages
  2. [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Gary Kent
 

I used SatFinder. Frederic used the app provided by the Red Cross. They both seemed to work fine.  Biggest problem is getting the tripod level.
Adjusting the legs is quite clunky.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Jer Kostro - Red Cross
Sent: Friday, July 13, 2018 12:39 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Gary, Mike et. al.

 

Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.

 

Jer aka AK6QJ

From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Additional info....

 

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

 

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

 

Mike, KD6AEB

 

 

 

On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


 

--

Mike Corum

_______________________

KD6AEB.com

 

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Join {main@ARC2-SDICC.groups.io to automatically receive all group messages.