- D878UV Firmware Update
Re: D878UV Firmware Update
toggle quoted messageShow quoted text
I just looked at our current code plug and this is off by
default. Should we turn it on in the next revision?
On 8/12/2019 9:21 PM, Bob Birch wrote:
I actually had to do this procedure in my previous up of firmware.
The setting is in the options and I believe the last field on
-------- Original message --------
Date: 8/12/19 9:16 PM (GMT-08:00)
Subject: Re: [ARC2-SDICC] D878UV Firmware Update
Hi, Bob -
Following is from this webpage:
I would try this first.
do I reset the radio? -or- Why
won’t the radio reset?
To reset the radio, turn it off,
hold down the PTT button and the
button directly beneath it and
keep holding those buttons while
turning the radio on. Within two
seconds you will see on the
display ’Are you sure you want to
Initialize radio?’ and then
Confirm above the green key and
Exit above the red key. If you are
sure you want to carry out the
reset, press the green key and the
radio will be reset.
On new firmware version 878
radios, if you do not see this
displayed on screen, there is a
setting in the CPS that needs to
be changed, otherwise holding in
the buttons for resetting will
have no effect. Startup Reset
needs to be set to ON to enable
reset to be carried out.
On 8/12/2019 8:10 PM, Bob Bernardi
via Groups.Io wrote:
I just got finished loading v1.13 of the
firmware into the radio. It all seems to have gone well, but
the instructions say to reset the radio. I followed the
instructions but never got the reset radio screen? Has
anyone else updated? Were you able to reset the radio?
Join main@ARC2-SDICC.groups.io to automatically receive all group messages.