Re: Well I tried = no way to get into the IEEE class


Bill W9QEM
 

I am sorry that you have had trouble attending the IEEE MOVE Operations training classes.  I had thought that the registration links had been sent to the local ARC DST group.  The first class was last night, below are the links for the remaining classes.  Please call me (see number below) if you have any problems.

NVITATION TO MOVE VIRTUAL OPERATIONS CLASS SERIES

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class.

Agenda

Part 1: 13 Sept 2022 from 8:00-10:00 PM ET  - https://events.vtools.ieee. org/m/322035

Part 2: 20 Sept 2022 from 8:00-10:00 PM ET  - https://events.vtools.ieee. org/m/322096

Part 3: 27 Sept 2022 from 8:00-10:00 PM ET  - https://events.vtools.ieee. org/m/322097

Please use the above links to register for all three training sessions

*There will be a test after the third session - material will be provided for the test. *

Regards;

IEEE-USA MOVE Communications Team

Bill Torre
619-417-9410



On Tuesday, September 13, 2022 at 08:22:47 PM PDT, Briggs, Danny via groups.io <danny.briggs@...> wrote:


Same results here poor audio quality and boring. The presentation delivery was conducted in a monotone voice. Maybe part II will be better. DB

Sent from my T-Mobile 5G Device
Get Outlook for Android

From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Steve <stevew6sjk@...>
Sent: Tuesday, September 13, 2022 7:28:08 PM
To: main@arc2-sdicc.groups.io <main@arc2-sdicc.groups.io>
Subject: [EXTERNAL] Re: [ARC2-SDICC] Well I tried = no way to get into the IEEE class
 
Again I didn't have any trouble understanding him.  Maybe the recording will be better but it's doubtful.

Steve

On Tue, Sep 13, 2022 at 6:59 PM Bruce <wa6dnt@...> wrote:
Finally found where the link was buried, and got in.
Then I could not understand the speaker as his audio was so muddy and muffled- there were NO high frequencies. I ran the audio thru my mixer with the EQ at MAX for the hi frequencies but it did not help much. Now its water under the bridge.
73 Bruce WA6DNT.

On 9/13/2022 5:48 PM, Steve wrote:
:(  It worked for me.  It took me to a page where it said to register (?) as Guest and I entered name and email.  It is also being recorded.

Steve

On Tue, Sep 13, 2022 at 5:46 PM Dan Hober <catch1release1@...> wrote:
I had a similar and frustrating experience.   I’ll help them if I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...> wrote:
>
> I joined IEEE and registered for these classes  some time ago - I clicked on the links they sent and all it does is take me to the -registration page.
>
> I found no usable link that will get me into the current ongoing class.
>
> When I signed up for IEEE membership, I found it was a multi stage difficult process.
>
> This site must have been constructed by engineers for engineers only. Why do they make it so hard?
>
> 73 Bruce  WA6DNT@...
>
>
>
>
>
>







--



--

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Join main@ARC2-SDICC.groups.io to automatically receive all group messages.