Date   

Re: Tomorrow Night's Net - RED-1 is Down

Eric Richardson
 

Seeking clarification on the channel freq. On our programmer list that's 147.130 +(PARC Palomar Mtn), correct?


On Mon, Jul 16, 2018, 10:53 PM Jer Kostro - Red Cross <jerry.kostro@...> wrote:
Hi, All -

For those of you planning on checking in to tomorrow night's net we will be using our backup channel ARC01.

ACS has informed us that RED-1 is down. The problem has been reported but there is no information on when the system will be restored.

73,

Jer aka AK6QJ


Re: Tomorrow Night's Net - RED-1 is Down

Joe Seraki. AI6ZE
 

Please give me an email check in. I can hear the 147.130 but bidding it is another thing.
Thank You
Joe Seraki.   AI6ZE

Sent from my MetroPCS 4G LTE Android device

----- Reply message -----
From: "rsteve9904 via Groups.Io" <rsteve9904@...>
To: "main@ARC2-SDICC.groups.io" <main@ARC2-SDICC.groups.io>
Subject: [ARC2-SDICC] Tomorrow Night's Net - RED-1 is Down
Date: Tue, Jul 17, 2018 16:30

Please grant me a e-mail check in
Rosalinda KI6WVA


-----Original Message-----
From: Jer Kostro - Red Cross <jerry.kostro@...>
To: main <main@ARC2-SDICC.groups.io>
Sent: Mon, Jul 16, 2018 10:53 pm
Subject: [ARC2-SDICC] Tomorrow Night's Net - RED-1 is Down

Hi, All -

For those of you planning on checking in to tomorrow night's net we will be using our backup channel ARC01.

ACS has informed us that RED-1 is down. The problem has been reported but there is no information on when the system will be restored.

73,

Jer aka AK6QJ


Re: Tomorrow Night's Net - RED-1 is Down

Rosalinda
 

Please grant me a e-mail check in
Rosalinda KI6WVA


-----Original Message-----
From: Jer Kostro - Red Cross <jerry.kostro@...>
To: main <main@ARC2-SDICC.groups.io>
Sent: Mon, Jul 16, 2018 10:53 pm
Subject: [ARC2-SDICC] Tomorrow Night's Net - RED-1 is Down

Hi, All -

For those of you planning on checking in to tomorrow night's net we will be using our backup channel ARC01.

ACS has informed us that RED-1 is down. The problem has been reported but there is no information on when the system will be restored.

73,

Jer aka AK6QJ


Re: Red Cross Communications Team Weekly Net - Tue, 7/17/18 8:00pm-8:30pm #cal-reminder

Grady Yearwood
 

Email check in from Campobello SC

AK4XK  &  KI6DBL


G


Red Cross Communications Team Weekly Net - Tue, 7/17/18 8:00pm-8:30pm #cal-reminder

main@ARC2-SDICC.groups.io Calendar <main@...>
 

Reminder:
Red Cross Communications Team Weekly Net

When:
Tuesday, 17 July 2018
8:00pm to 8:30pm
(GMT-07:00) America/Los Angeles

Where:
RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8

Description:
Net Control - AK6QJ
North Check-Ins - KG6RGI
South Check-Ins - KJ6MVB

This is a voted repeater system. Please allow approximately 1 second between pushing the PTT button on you mic and talking to allow the system to work its magic. Repeater times out after 2 minutes. If this repeater is unavailable please migrate to the PARC 130 machine (147.130 MHz, "+" offset, PL 107.2).

View Event.


Re: Red Cross Communications Team Weekly Net - Tue, 7/17/18 8:00pm-8:30pm #cal-reminder

Arthur Hochberg - AE6O <ahoch@...>
 

RACES/ACS RED-1 was down last night for the ACS net.  We used RED-2, 147.195 +, PL 110.9, on North Peak.

Art
ae6o


Re: Red Cross Communications Team Weekly Net - Tue, 7/17/18 8:00pm-8:30pm #cal-reminder

j_mccollo
 

June & Roger checkin in for Tensed ID.

KG6JJM & KF6 HBU



Sent via the Samsung Galaxy S® 6, an AT&T 4G LTE smartphone

-------- Original message --------
From: "main@ARC2-SDICC.groups.io Calendar" <main@ARC2-SDICC.groups.io>
Date: 7/16/18 8:00 PM (GMT-07:00)
To: main@ARC2-SDICC.groups.io
Subject: [ARC2-SDICC] Red Cross Communications Team Weekly Net - Tue, 7/17/18 8:00pm-8:30pm #cal-reminder

Reminder:
Red Cross Communications Team Weekly Net

When:
Tuesday, 17 July 2018
8:00pm to 8:30pm
(GMT-07:00) America/Los Angeles

Where:
RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8

Description:
Net Control - AK6QJ
North Check-Ins - KG6RGI
South Check-Ins - KJ6MVB

This is a voted repeater system. Please allow approximately 1 second between pushing the PTT button on you mic and talking to allow the system to work its magic. Repeater times out after 2 minutes. If this repeater is unavailable please migrate to the PARC 130 machine (147.130 MHz, "+" offset, PL 107.2).

View Event.


Tomorrow Night's Net - RED-1 is Down

Jer Kostro - Red Cross
 

Hi, All -

For those of you planning on checking in to tomorrow night's net we will be using our backup channel ARC01.

ACS has informed us that RED-1 is down. The problem has been reported but there is no information on when the system will be restored.

73,

Jer aka AK6QJ


Red Cross Communications Team Weekly Net - Tue, 7/17/18 8:00pm-8:30pm #cal-reminder

main@ARC2-SDICC.groups.io Calendar <main@...>
 

Reminder:
Red Cross Communications Team Weekly Net

When:
Tuesday, 17 July 2018
8:00pm to 8:30pm
(GMT-07:00) America/Los Angeles

Where:
RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8

Description:
Net Control - AK6QJ
North Check-Ins - KG6RGI
South Check-Ins - KJ6MVB

This is a voted repeater system. Please allow approximately 1 second between pushing the PTT button on you mic and talking to allow the system to work its magic. Repeater times out after 2 minutes. If this repeater is unavailable please migrate to the PARC 130 machine (147.130 MHz, "+" offset, PL 107.2).

View Event.


Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Fredric Raab
 

At the Austin HOT, we simply used the MITe app to obtain the azimuth and elevation.   But it has other functions that require a WiFi connections, which we did not cover in class.

I thought of this after I left the RC on Saturday.  Next month, we should connect a WiFi access point and explore.  I found the attached documentation for MITe on the Internet.

Regards,
Fredric
KK6NOW



On Friday, July 13, 2018, 9:24:31 PM PDT, Gary Kent <gary.kent@...> wrote:


We did not. Our objective was to simply set up the dish and update software as needed.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Bob Birch
Sent: Friday, July 13, 2018 5:43 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Did you have a router to connect to a wifi connected to the modem?

 

 

 

Sent from my Verizon 4G LTE smartphone



-------- Original message --------
From: Mike Corum <KD6AEB@...>
Date: 7/13/18 5:22 PM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Jer

 

Yes— the MITe iPhone app by ViaSat was what they recommended at the Austin HOT. 

 

Fredric had it installed on his phone already. 

____________________________

Mike, KD6AEB


On Jul 13, 2018, at 2:51 PM, Gary Kent <gary.kent@...> wrote:

I used SatFinder. Frederic used the app provided by the Red Cross. They both seemed to work fine.  Biggest problem is getting the tripod level.
Adjusting the legs is quite clunky.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Jer Kostro - Red Cross
Sent: Friday, July 13, 2018 12:39 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Gary, Mike et. al.

 

Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.

 

Jer aka AK6QJ


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Additional info....

 

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

 

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

 

Mike, KD6AEB

 

 

 

On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


 

--

Mike Corum

_______________________

 

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Gary Kent
 

We did not. Our objective was to simply set up the dish and update software as needed.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Bob Birch
Sent: Friday, July 13, 2018 5:43 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Did you have a router to connect to a wifi connected to the modem?

 

 

 

Sent from my Verizon 4G LTE smartphone



-------- Original message --------
From: Mike Corum <KD6AEB@...>
Date: 7/13/18 5:22 PM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Jer

 

Yes— the MITe iPhone app by ViaSat was what they recommended at the Austin HOT. 

 

Fredric had it installed on his phone already. 

____________________________

Mike, KD6AEB


On Jul 13, 2018, at 2:51 PM, Gary Kent <gary.kent@...> wrote:

I used SatFinder. Frederic used the app provided by the Red Cross. They both seemed to work fine.  Biggest problem is getting the tripod level.
Adjusting the legs is quite clunky.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Jer Kostro - Red Cross
Sent: Friday, July 13, 2018 12:39 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Gary, Mike et. al.

 

Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.

 

Jer aka AK6QJ


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Additional info....

 

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

 

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

 

Mike, KD6AEB

 

 

 

On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


 

--

Mike Corum

_______________________

 

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Bob Birch
 

Did you have a router to connect to a wifi connected to the modem?



Sent from my Verizon 4G LTE smartphone


-------- Original message --------
From: Mike Corum <KD6AEB@...>
Date: 7/13/18 5:22 PM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Jer

Yes— the MITe iPhone app by ViaSat was what they recommended at the Austin HOT. 

Fredric had it installed on his phone already. 

____________________________
Mike, KD6AEB

On Jul 13, 2018, at 2:51 PM, Gary Kent <gary.kent@...> wrote:

I used SatFinder. Frederic used the app provided by the Red Cross. They both seemed to work fine.  Biggest problem is getting the tripod level.
Adjusting the legs is quite clunky.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Jer Kostro - Red Cross
Sent: Friday, July 13, 2018 12:39 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Gary, Mike et. al.

 

Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.

 

Jer aka AK6QJ


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Additional info....

 

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

 

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

 

Mike, KD6AEB

 

 

 

On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


 

--

Mike Corum

_______________________

 

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Mike Corum
 

Jer

Yes— the MITe iPhone app by ViaSat was what they recommended at the Austin HOT. 

Fredric had it installed on his phone already. 

____________________________
Mike, KD6AEB

On Jul 13, 2018, at 2:51 PM, Gary Kent <gary.kent@...> wrote:

I used SatFinder. Frederic used the app provided by the Red Cross. They both seemed to work fine.  Biggest problem is getting the tripod level.
Adjusting the legs is quite clunky.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Jer Kostro - Red Cross
Sent: Friday, July 13, 2018 12:39 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Gary, Mike et. al.

 

Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.

 

Jer aka AK6QJ


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Additional info....

 

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

 

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

 

Mike, KD6AEB

 

 

 

On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


 

--

Mike Corum

_______________________

 

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Bob Birch
 

In order to use the Mite3 app you would need a wifi connection to the modem. We don't have any wifi routers in the kit or spares in chapter right now. Hopefully it's something we can add in the future. Next time you deploy the ViaSat I may bring a spare one to see how the app works.

Bob



Sent from my Verizon 4G LTE smartphone


-------- Original message --------
From: Gary Kent <gary.kent@...>
Date: 7/13/18 2:51 PM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

I used SatFinder. Frederic used the app provided by the Red Cross. They both seemed to work fine.  Biggest problem is getting the tripod level.
Adjusting the legs is quite clunky.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Jer Kostro - Red Cross
Sent: Friday, July 13, 2018 12:39 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Gary, Mike et. al.

 

Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.

 

Jer aka AK6QJ


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Additional info....

 

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

 

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

 

Mike, KD6AEB

 

 

 

On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


 

--

Mike Corum

_______________________

KD6AEB.com

 

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Gary Kent
 

I used SatFinder. Frederic used the app provided by the Red Cross. They both seemed to work fine.  Biggest problem is getting the tripod level.
Adjusting the legs is quite clunky.

 

GK

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Jer Kostro - Red Cross
Sent: Friday, July 13, 2018 12:39 PM
To: main@ARC2-SDICC.groups.io
Subject: Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Gary, Mike et. al.

 

Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.

 

Jer aka AK6QJ


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

 

Additional info....

 

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

 

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

 

Mike, KD6AEB

 

 

 

On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


 

--

Mike Corum

_______________________

KD6AEB.com

 

 

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Re: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal

Jer Kostro - Red Cross
 

Gary, Mike et. al.


Did you use the MITE3  app? If so, any comments/suggestions?

Thanks.


Jer aka AK6QJ


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Mike Corum <KD6AEB@...>
Sent: Friday, July 13, 2018 12:19:31 PM
To: main@arc2-sdicc.groups.io
Subject: [EXTERNAL] Re: [ARC2-SDICC] Viasat Terminal
 
Additional info....

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

Mike, KD6AEB



On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent



--
Mike Corum
_______________________
KD6AEB.com



CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Re: Viasat Terminal

Mike Corum
 

Additional info....

We were able to achieve a satellite signal ratio of ~ 8.06  which allowed a 25.9 MB Download speed and Upload of 4.19 MB (fairly respectable rate).

The software version on the satellite is UT_3.7.3.10.9.  The DOCC indicated it was the most recent version.

Mike, KD6AEB



On Thu, Jul 12, 2018 at 1:22 PM Gary Kent <gary.kent@...> wrote:

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent



--
Mike Corum
_______________________
KD6AEB.com



Viasat Terminal

NI6H
 

Opps……….

 

From: NI6H [mailto:ni6h@...]
Sent: Thursday, July 12, 2018 1:28 PM
To: 'main@ARC2-SDICC.groups.io'
Subject: Viasat Terminal

 

Gary,

 

What was the DOCC phone number you used?  When I did my DST training in March of this year I was given 2 #’;

1.    DST Help Desk; 202-403-4126, and

2.    DOCC Coordination Center; 201-303-4126

 

Both of these #’s are not correct, can you update both or just update the correct DOCC #.   I post this direct because not everyone on groups.io have the training and should not have these until they do.

 

Rich NI6H

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Gary Kent
Sent: Thursday, July 12, 2018 1:22 PM
To: main@ARC2-SDICC.groups.io
Subject: [ARC2-SDICC] Viasat Terminal

 

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


Viasat Terminal

NI6H
 

Gary,

 

What was the DOCC phone number you used?  When I did my DST training in March of this year I was given 2 #’;

1.    DST Help Desk; 202-403-4126, and

2.    DOCC Coordination Center; 201-303-4126

 

Both of these #’s are not correct, can you update both or just update the correct DOCC #.   I post this direct because not everyone on groups.io have the training and should not have these until they do.

 

Rich NI6H

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Gary Kent
Sent: Thursday, July 12, 2018 1:22 PM
To: main@ARC2-SDICC.groups.io
Subject: [ARC2-SDICC] Viasat Terminal

 

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent


Viasat Terminal

Gary Kent
 

Mike Corum, Fredric Raab, Dan Musick and I setup the Viasat terminal successfully this morning.   We contacted the DST@DOCC and found that the terminal had up to date software.  It took roughly an hour to get it setup, and another 20 to 30 minutes to call the DOCC to check the software.

 

Gary Kent

1481 - 1500 of 8259