Re: Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/13/2019 8:00pm-8:30pm
#cal-reminder
Mike Corum
Email check in please. I have CERT training tonight.
toggle quoted messageShow quoted text
On Aug 13, 2019, at 2:00 PM, main@ARC2-SDICC.groups.io Calendar <main@arc2-sdicc.groups.io> wrote:
|
|
Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/13/2019 8:00pm-8:30pm
#cal-reminder
main@ARC2-SDICC.groups.io Calendar <main@...>
Reminder: Red Cross Communications Team Weekly Net When: Tuesday, 13 August 2019, 8:00pm to 8:30pm, (GMT-07:00) America/Los Angeles Where:RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8 Description: Net Control - WA6DNT
|
|
Re: PAPA Repeater Map
Bob Birch
Thanks Steve for doing that.
toggle quoted messageShow quoted text
Bob
-------- Original message -------- From: Steve <stevew7sjk@...> Date: 8/13/19 8:20 AM (GMT-08:00) To: main@arc2-sdicc.groups.io Subject: Re: [ARC2-SDICC] PAPA Repeater Map Hi all: Nat made a good comment/suggestion asking if Vista should be labeled San Marcos. I took the names directly off of the papasys.com map and didn't notice that that location had two different names. So I revised the map. Thanks Nat. I added a DMR repeater list and also renamed the file since it is not just a DMR location map. Any more comments? On Mon, Aug 12, 2019 at 10:47 PM Steve via Groups.Io <stevew7sjk=gmail.com@groups.io> wrote: Being a bit geographically challenged, I created the attached repeater location map.
|
|
Re: PAPA Repeater Map
Hi all: Nat made a good comment/suggestion asking if Vista should be labeled San Marcos. I took the names directly off of the papasys.com map and didn't notice that that location had two different names. So I revised the map. Thanks Nat. I added a DMR repeater list and also renamed the file since it is not just a DMR location map. Any more comments?
On Mon, Aug 12, 2019 at 10:47 PM Steve via Groups.Io <stevew7sjk=gmail.com@groups.io> wrote: Being a bit geographically challenged, I created the attached repeater location map.
|
|
PAPA Repeater Map
Being a bit geographically challenged, I created the attached repeater location map.
I could add the frequencies, color codes etc in another version but it would get very crowded. For your reference... 73 Steve Kurtzman W7SJK
|
|
Re: D878UV Firmware Update
Bob Bernardi
Thanks Bob, I’ll do it
toggle quoted messageShow quoted text
Bob
On Aug 12, 2019, at 9:50 PM, Jer Kostro - Red Cross <jer.kostro.AK6QJ@...> wrote:
|
|
Re: D878UV Firmware Update
Jer Kostro - Red Cross
I just looked at our current code plug and this is off by
default. Should we turn it on in the next revision?
On 8/12/2019 9:21 PM, Bob Birch wrote:
I actually had to do this procedure in my previous up of firmware. The setting is in the options and I believe the last field on poeron
|
|
Re: D878UV Firmware Update
Bob Birch
I actually had to do this procedure in my previous up of firmware. The setting is in the options and I believe the last field on poeron
toggle quoted messageShow quoted text
-------- Original message -------- From: Jer Kostro - Red Cross <jer.kostro.AK6QJ@...> Date: 8/12/19 9:16 PM (GMT-08:00) To: main@ARC2-SDICC.groups.io Subject: Re: [ARC2-SDICC] D878UV Firmware Update Hi, Bob - Following is from this webpage: http://members.optuszoo.com.au/jason.reilly1/868mods.htm I would try this first. How do I reset the
radio? -or- Why won’t the radio
reset? On 8/12/2019 8:10 PM, Bob Bernardi via
Groups.Io wrote:
|
|
Re: D878UV Firmware Update
Jer Kostro - Red Cross
Hi, Bob - Following is from this webpage: http://members.optuszoo.com.au/jason.reilly1/868mods.htm I would try this first. How do I reset the
radio? -or- Why won’t the radio
reset?
On 8/12/2019 8:10 PM, Bob Bernardi via
Groups.Io wrote:
|
|
D878UV Firmware Update
Bob Bernardi
Hi
I just got finished loading v1.13 of the firmware into the radio. It all seems to have gone well, but the instructions say to reset the radio. I followed the instructions but never got the reset radio screen? Has anyone else updated? Were you able to reset the radio?
Thanks, Bob
|
|
Re: Latest PAPA SYS Code Plug
Bob Bernardi
I saw the new version on line yesterday.
toggle quoted messageShow quoted text
On Aug 12, 2019, at 10:11 AM, Jer Kostro - Red Cross <jer.kostro.AK6QJ@...> wrote:
|
|
Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/13/2019 8:00pm-8:30pm
#cal-reminder
main@ARC2-SDICC.groups.io Calendar <main@...>
Reminder: Red Cross Communications Team Weekly Net When: Tuesday, 13 August 2019, 8:00pm to 8:30pm, (GMT-07:00) America/Los Angeles Where:RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8 Description: Net Control - WA6DNT
|
|
Fun With DMR - Updating Your Anytone 878 Contact List
Jer Kostro - Red Cross
Hi, All -
Draft contact list instructions attached. Let me know if you have any comments, questions or suggestions. 73, Jer aka AK6QJ
|
|
Re: Latest PAPA SYS Code Plug
Jer Kostro - Red Cross
New 878 are coming out with firmware 1.13. Might have to upgrade the CPS.
On 8/12/2019 9:44 AM, Nat Suwarnasarn
wrote:
|
|
Re: Latest PAPA SYS Code Plug
Nat 2733E N6BRV
I opened the D868-PAPA-2019-aug-08a.rdt file and it does NOT contain the ARC channels. Cannot open the D878-PAPA-2019-aug-08a.rdt file seems to be version 1264 my software is version 1260.
73’ N6BRV
From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Patrick
Sent: Monday, August 12, 2019 9:16 AM To: main@ARC2-SDICC.groups.io Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug
maybe my problem. When I opened the new code plug it got an error and automatically loaded my old file. When I used the open new file it showed an error. So I was looking at my old file. A funny glitch in the software to open a file other than the one I was attempting to load. For me the code plug I downloaded twice errors when I load it.
From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Bob Birch <rrbirch@...>
Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.
I will have to go out to PAPA and take a look
Bib
-------- Original message -------- From: Patrick <P_J_H@...> Date: 8/12/19 8:17 AM (GMT-08:00) To: main@ARC2-SDICC.groups.io Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug
600 and 800 channels. I thought we took their release and updated with our information. Are they now maintaining for us?
|
|
Re: Latest PAPA SYS Code Plug
Patrick
maybe my problem.
When I opened the new code plug it got an error and automatically loaded my old file.
When I used the open new file it showed an error.
So I was looking at my old file.
A funny glitch in the software to open a file other than the one I was attempting to load.
For me the code plug I downloaded twice errors when I load it.
From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Bob Birch <rrbirch@...>
Sent: Monday, August 12, 2019 08:50 To: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.
I will have to go out to PAPA and take a look
Bib
-------- Original message --------
From: Patrick <P_J_H@...>
Date: 8/12/19 8:17 AM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug
I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.
600 and 800 channels.
I thought we took their release and updated with our information.
Are they now maintaining for us?
|
|
Re: Latest PAPA SYS Code Plug
Bob Birch
Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.
toggle quoted messageShow quoted text
I will have to go out to PAPA and take a look Bib
-------- Original message -------- From: Patrick <P_J_H@...> Date: 8/12/19 8:17 AM (GMT-08:00) To: main@ARC2-SDICC.groups.io Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.
600 and 800 channels.
I thought we took their release and updated with our information.
Are they now maintaining for us?
|
|
Latest PAPA SYS Code Plug
Patrick
I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.
600 and 800 channels.
I thought we took their release and updated with our information.
Are they now maintaining for us?
|
|
Monitoring PAPA 3 Analog on Broadcastify
Just added with PAPA permission by Kevin Brouelette AJ6EE
https://www.broadcastify.com/listen/feed/31039/
|
|
Re: PAPA Presentation of Anytone AT-D878 Programming and Use
OK I re-uploaded the video and it plays fine. We'll see how long that lasts. :)
https://youtu.be/d1CSGJjLEiI
|
|