Date   

PAPA Repeater Map

Steve
 

Being a bit geographically challenged, I created the attached repeater location map.

I could add the frequencies, color codes etc in another version but it would get very crowded.

For your reference...

73
Steve Kurtzman W7SJK


Re: D878UV Firmware Update

Bob Bernardi
 

Thanks Bob, I’ll do it

Bob


On Aug 12, 2019, at 9:50 PM, Jer Kostro - Red Cross <jer.kostro.AK6QJ@...> wrote:

I just looked at our current code plug and this is off by default. Should we turn it on in the next revision?

On 8/12/2019 9:21 PM, Bob Birch wrote:
I actually had to do this procedure in my previous up of firmware. The setting is in the options and I believe the last field on poeron

-------- Original message --------
From: Jer Kostro - Red Cross <jer.kostro.AK6QJ@...>
Date: 8/12/19 9:16 PM (GMT-08:00)
Subject: Re: [ARC2-SDICC] D878UV Firmware Update

Hi, Bob -

Following is from this webpage:

http://members.optuszoo.com.au/jason.reilly1/868mods.htm

I would try this first.

How do I reset the radio? -or- Why won’t the radio reset?
To reset the radio, turn it off, hold down the PTT button and the button directly beneath it and keep holding those buttons while turning the radio on. Within two seconds you will see on the display ’Are you sure you want to Initialize radio?’ and then Confirm above the green key and Exit above the red key. If you are sure you want to carry out the reset, press the green key and the radio will be reset.

On new firmware version 878 radios, if you do not see this displayed on screen, there is a setting in the CPS that needs to be changed, otherwise holding in the buttons for resetting will have no effect. Startup Reset needs to be set to ON to enable reset to be carried out.

On 8/12/2019 8:10 PM, Bob Bernardi via Groups.Io wrote:

Hi

 

I just got finished loading v1.13 of the firmware into the radio. It all seems to have gone well, but the instructions say to reset the radio. I followed the instructions but never got the reset radio screen? Has anyone else updated? Were you able to reset the radio?

 

Thanks, Bob


Re: D878UV Firmware Update

Jer Kostro - Red Cross
 

I just looked at our current code plug and this is off by default. Should we turn it on in the next revision?

On 8/12/2019 9:21 PM, Bob Birch wrote:
I actually had to do this procedure in my previous up of firmware. The setting is in the options and I believe the last field on poeron

-------- Original message --------
From: Jer Kostro - Red Cross <jer.kostro.AK6QJ@...>
Date: 8/12/19 9:16 PM (GMT-08:00)
Subject: Re: [ARC2-SDICC] D878UV Firmware Update

Hi, Bob -

Following is from this webpage:

http://members.optuszoo.com.au/jason.reilly1/868mods.htm

I would try this first.

How do I reset the radio? -or- Why won’t the radio reset?
To reset the radio, turn it off, hold down the PTT button and the button directly beneath it and keep holding those buttons while turning the radio on. Within two seconds you will see on the display ’Are you sure you want to Initialize radio?’ and then Confirm above the green key and Exit above the red key. If you are sure you want to carry out the reset, press the green key and the radio will be reset.

On new firmware version 878 radios, if you do not see this displayed on screen, there is a setting in the CPS that needs to be changed, otherwise holding in the buttons for resetting will have no effect. Startup Reset needs to be set to ON to enable reset to be carried out.

On 8/12/2019 8:10 PM, Bob Bernardi via Groups.Io wrote:

Hi

 

I just got finished loading v1.13 of the firmware into the radio. It all seems to have gone well, but the instructions say to reset the radio. I followed the instructions but never got the reset radio screen? Has anyone else updated? Were you able to reset the radio?

 

Thanks, Bob


Re: D878UV Firmware Update

Bob Birch
 

I actually had to do this procedure in my previous up of firmware. The setting is in the options and I believe the last field on poeron

-------- Original message --------
From: Jer Kostro - Red Cross <jer.kostro.AK6QJ@...>
Date: 8/12/19 9:16 PM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: Re: [ARC2-SDICC] D878UV Firmware Update

Hi, Bob -

Following is from this webpage:

http://members.optuszoo.com.au/jason.reilly1/868mods.htm

I would try this first.

How do I reset the radio? -or- Why won’t the radio reset?
To reset the radio, turn it off, hold down the PTT button and the button directly beneath it and keep holding those buttons while turning the radio on. Within two seconds you will see on the display ’Are you sure you want to Initialize radio?’ and then Confirm above the green key and Exit above the red key. If you are sure you want to carry out the reset, press the green key and the radio will be reset.

On new firmware version 878 radios, if you do not see this displayed on screen, there is a setting in the CPS that needs to be changed, otherwise holding in the buttons for resetting will have no effect. Startup Reset needs to be set to ON to enable reset to be carried out.

On 8/12/2019 8:10 PM, Bob Bernardi via Groups.Io wrote:

Hi

 

I just got finished loading v1.13 of the firmware into the radio. It all seems to have gone well, but the instructions say to reset the radio. I followed the instructions but never got the reset radio screen? Has anyone else updated? Were you able to reset the radio?

 

Thanks, Bob


Re: D878UV Firmware Update

Jer Kostro - Red Cross
 

Hi, Bob -

Following is from this webpage:

http://members.optuszoo.com.au/jason.reilly1/868mods.htm

I would try this first.

How do I reset the radio? -or- Why won’t the radio reset?
To reset the radio, turn it off, hold down the PTT button and the button directly beneath it and keep holding those buttons while turning the radio on. Within two seconds you will see on the display ’Are you sure you want to Initialize radio?’ and then Confirm above the green key and Exit above the red key. If you are sure you want to carry out the reset, press the green key and the radio will be reset.

On new firmware version 878 radios, if you do not see this displayed on screen, there is a setting in the CPS that needs to be changed, otherwise holding in the buttons for resetting will have no effect. Startup Reset needs to be set to ON to enable reset to be carried out.

On 8/12/2019 8:10 PM, Bob Bernardi via Groups.Io wrote:

Hi

 

I just got finished loading v1.13 of the firmware into the radio. It all seems to have gone well, but the instructions say to reset the radio. I followed the instructions but never got the reset radio screen? Has anyone else updated? Were you able to reset the radio?

 

Thanks, Bob


D878UV Firmware Update

Bob Bernardi
 

Hi

 

I just got finished loading v1.13 of the firmware into the radio. It all seems to have gone well, but the instructions say to reset the radio. I followed the instructions but never got the reset radio screen? Has anyone else updated? Were you able to reset the radio?

 

Thanks, Bob


Re: Latest PAPA SYS Code Plug

Bob Bernardi
 

I saw the new version on line yesterday.


On Aug 12, 2019, at 10:11 AM, Jer Kostro - Red Cross <jer.kostro.AK6QJ@...> wrote:

New 878 are coming out with firmware 1.13. Might have to upgrade the CPS.


On 8/12/2019 9:44 AM, Nat Suwarnasarn wrote:

I opened the D868-PAPA-2019-aug-08a.rdt file and it does NOT contain the ARC channels.

Cannot open the D878-PAPA-2019-aug-08a.rdt file seems to be version 1264 my software is version 1260.

 

73’ N6BRV

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Patrick
Sent: Monday, August 12, 2019 9:16 AM
To: main@ARC2-SDICC.groups.io
Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug

 

maybe my problem.

When I opened the new code plug it got an error and automatically loaded my old file.

When I used the open new file it showed an error.

So I was looking at my old file.

A funny glitch in the software to open a file other than the one I was attempting to load.

For me the code plug I downloaded twice errors when I load it.

 


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Bob Birch <rrbirch@...>
Sent: Monday, August 12, 2019 08:50
To: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io>
Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug

 

Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.

 

I will have to go out to PAPA and take a look

 

Bib

 

-------- Original message --------

From: Patrick <P_J_H@...>

Date: 8/12/19 8:17 AM (GMT-08:00)

Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug

 


I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.

600 and 800 channels.

I thought we took their release and updated with our information.

Are they now maintaining for us?

 

 


Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/13/2019 8:00pm-8:30pm #cal-reminder

main@ARC2-SDICC.groups.io Calendar <main@...>
 

Reminder: Red Cross Communications Team Weekly Net

When: Tuesday, 13 August 2019, 8:00pm to 8:30pm, (GMT-07:00) America/Los Angeles

Where:RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8

View Event

Description: Net Control - WA6DNT
North Check-Ins - AK6QJ
South Check-Ins - W7SJK

This is a voted repeater system. Please allow approximately 1 second between pushing the PTT button on you mic and talking to allow the system to work its magic. Repeater times out after 2 minutes. If this repeater is unavailable please migrate to the PARC 130 machine (147.130 MHz, "+" offset, PL 107.2).


Fun With DMR - Updating Your Anytone 878 Contact List

Jer Kostro - Red Cross
 

Hi, All -

Draft contact list instructions attached. Let me know if you have any comments, questions or suggestions.

73,

Jer aka AK6QJ


Re: Latest PAPA SYS Code Plug

Jer Kostro - Red Cross
 

New 878 are coming out with firmware 1.13. Might have to upgrade the CPS.


On 8/12/2019 9:44 AM, Nat Suwarnasarn wrote:

I opened the D868-PAPA-2019-aug-08a.rdt file and it does NOT contain the ARC channels.

Cannot open the D878-PAPA-2019-aug-08a.rdt file seems to be version 1264 my software is version 1260.

 

73’ N6BRV

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Patrick
Sent: Monday, August 12, 2019 9:16 AM
To: main@ARC2-SDICC.groups.io
Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug

 

maybe my problem.

When I opened the new code plug it got an error and automatically loaded my old file.

When I used the open new file it showed an error.

So I was looking at my old file.

A funny glitch in the software to open a file other than the one I was attempting to load.

For me the code plug I downloaded twice errors when I load it.

 


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Bob Birch <rrbirch@...>
Sent: Monday, August 12, 2019 08:50
To: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io>
Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug

 

Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.

 

I will have to go out to PAPA and take a look

 

Bib

 

-------- Original message --------

From: Patrick <P_J_H@...>

Date: 8/12/19 8:17 AM (GMT-08:00)

Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug

 


I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.

600 and 800 channels.

I thought we took their release and updated with our information.

Are they now maintaining for us?

 

 


Re: Latest PAPA SYS Code Plug

Nat 2733E N6BRV
 

I opened the D868-PAPA-2019-aug-08a.rdt file and it does NOT contain the ARC channels.

Cannot open the D878-PAPA-2019-aug-08a.rdt file seems to be version 1264 my software is version 1260.

 

73’ N6BRV

 

From: main@ARC2-SDICC.groups.io [mailto:main@ARC2-SDICC.groups.io] On Behalf Of Patrick
Sent: Monday, August 12, 2019 9:16 AM
To: main@ARC2-SDICC.groups.io
Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug

 

maybe my problem.

When I opened the new code plug it got an error and automatically loaded my old file.

When I used the open new file it showed an error.

So I was looking at my old file.

A funny glitch in the software to open a file other than the one I was attempting to load.

For me the code plug I downloaded twice errors when I load it.

 


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Bob Birch <rrbirch@...>
Sent: Monday, August 12, 2019 08:50
To: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io>
Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug

 

Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.

 

I will have to go out to PAPA and take a look

 

Bib

 

-------- Original message --------

From: Patrick <P_J_H@...>

Date: 8/12/19 8:17 AM (GMT-08:00)

To: main@ARC2-SDICC.groups.io

Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug

 


I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.

600 and 800 channels.

I thought we took their release and updated with our information.

Are they now maintaining for us?

 

 


Re: Latest PAPA SYS Code Plug

Patrick
 

maybe my problem.
When I opened the new code plug it got an error and automatically loaded my old file.
When I used the open new file it showed an error.
So I was looking at my old file.
A funny glitch in the software to open a file other than the one I was attempting to load.
For me the code plug I downloaded twice errors when I load it.


From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Bob Birch <rrbirch@...>
Sent: Monday, August 12, 2019 08:50
To: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io>
Subject: Re: [ARC2-SDICC] Latest PAPA SYS Code Plug
 
Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.

I will have to go out to PAPA and take a look

Bib

-------- Original message --------
From: Patrick <P_J_H@...>
Date: 8/12/19 8:17 AM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug


I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.
600 and 800 channels.
I thought we took their release and updated with our information.
Are they now maintaining for us?



Re: Latest PAPA SYS Code Plug

Bob Birch
 

Interesting, no they are not maintaining it. To my knowledge. Only person I have given our codeplug to is the person who has been selling us the radios. I just sent him a new codeplug because of the changes to Elsuore Peak.

I will have to go out to PAPA and take a look

Bib

-------- Original message --------
From: Patrick <P_J_H@...>
Date: 8/12/19 8:17 AM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: [ARC2-SDICC] Latest PAPA SYS Code Plug


I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.
600 and 800 channels.
I thought we took their release and updated with our information.
Are they now maintaining for us?



Latest PAPA SYS Code Plug

Patrick
 


I noticed that the latest code plug released by the papa system for general D878 use has all of our ARC frequencies included.
600 and 800 channels.
I thought we took their release and updated with our information.
Are they now maintaining for us?



Monitoring PAPA 3 Analog on Broadcastify

Steve
 

Just added with PAPA permission by Kevin Brouelette AJ6EE

https://www.broadcastify.com/listen/feed/31039/


Re: PAPA Presentation of Anytone AT-D878 Programming and Use

Steve
 

OK I re-uploaded the video and it plays fine.  We'll see how long that lasts. :)

https://youtu.be/d1CSGJjLEiI


Re: Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/06/2019 8:00pm-8:30pm #cal-reminder

Greg Hidley
 

See https://hytera.co.uk/news/a-guide-to-two-way-radio-emergency-features-man-down-gps-and-lone-worker  for details on work-alone mode and other field safety dmr options.

greg


On Tue, Aug 6, 2019 at 7:08 PM Kathy Payne <kpaynekj6mvb@...> wrote:
Please, early check in tonight...…….

Kathy, KJ6MVB, Julian
South


On Tue, Aug 6, 2019 at 5:20 PM Mike Corum <KD6AEB@...> wrote:
Email checkin for tonight’s net ... please 

Thanks

____________________________
Mike, KD6AEB

On Aug 6, 2019, at 2:00 PM, main@ARC2-SDICC.groups.io Calendar <main@arc2-sdicc.groups.io> wrote:

Reminder: Red Cross Communications Team Weekly Net

When: Tuesday, 6 August 2019, 8:00pm to 8:30pm, (GMT-07:00) America/Los Angeles

Where:RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8

View Event

Description: Net Control - KG6RGI
North Check-Ins - AK6QJ
South Check-Ins - K6REW

This is a voted repeater system. Please allow approximately 1 second between pushing the PTT button on you mic and talking to allow the system to work its magic. Repeater times out after 2 minutes. If this repeater is unavailable please migrate to the PARC 130 machine (147.130 MHz, "+" offset, PL 107.2).


Re: Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/06/2019 8:00pm-8:30pm #cal-reminder

Kathy Payne
 

Please, early check in tonight...…….

Kathy, KJ6MVB, Julian
South


On Tue, Aug 6, 2019 at 5:20 PM Mike Corum <KD6AEB@...> wrote:
Email checkin for tonight’s net ... please 

Thanks

____________________________
Mike, KD6AEB

On Aug 6, 2019, at 2:00 PM, main@ARC2-SDICC.groups.io Calendar <main@arc2-sdicc.groups.io> wrote:

Reminder: Red Cross Communications Team Weekly Net

When: Tuesday, 6 August 2019, 8:00pm to 8:30pm, (GMT-07:00) America/Los Angeles

Where:RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8

View Event

Description: Net Control - KG6RGI
North Check-Ins - AK6QJ
South Check-Ins - K6REW

This is a voted repeater system. Please allow approximately 1 second between pushing the PTT button on you mic and talking to allow the system to work its magic. Repeater times out after 2 minutes. If this repeater is unavailable please migrate to the PARC 130 machine (147.130 MHz, "+" offset, PL 107.2).


Re: Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/06/2019 8:00pm-8:30pm #cal-reminder

Mike Corum
 

Email checkin for tonight’s net ... please 

Thanks

____________________________
Mike, KD6AEB

On Aug 6, 2019, at 2:00 PM, main@ARC2-SDICC.groups.io Calendar <main@arc2-sdicc.groups.io> wrote:

Reminder: Red Cross Communications Team Weekly Net

When: Tuesday, 6 August 2019, 8:00pm to 8:30pm, (GMT-07:00) America/Los Angeles

Where:RACES/ACS Repeater; 147.195 MHz, "+" offset, PL 114.8

View Event

Description: Net Control - KG6RGI
North Check-Ins - AK6QJ
South Check-Ins - K6REW

This is a voted repeater system. Please allow approximately 1 second between pushing the PTT button on you mic and talking to allow the system to work its magic. Repeater times out after 2 minutes. If this repeater is unavailable please migrate to the PARC 130 machine (147.130 MHz, "+" offset, PL 107.2).


Re: Upcoming Event: Red Cross Communications Team Weekly Net - Tue, 08/06/2019 8:00pm-8:30pm #cal-reminder

Daniel Musick
 

Early check in tonight Please !
8/6/ KG6VVN

801 - 820 of 8050