|
Hi Bill
I finally got in after I found the link
buried deep down and below the confusing sign on (account or no
Account Or guest box's)
After I finally got in - I could not
understand the muffled muddy audio of the speaker. I was only
getting 50% of what was spoken - so finally I routed the audio
thru my professional mixer and ran the high frequency EQ up to max
and the mid range down to -10 Db, and no bass. but even then the
audio was difficult to listen to. The speaker needs a new mic that
has a good high frequency response! I wonder if the speaker has
ever listened to what his audio sounds like?!
On 9/14/2022 11:28 AM, Bill W9QEM
wrote:
toggle quoted message
Show quoted text
I am sorry that you have had
trouble attending the IEEE MOVE Operations training classes.
I had thought that the registration links had been sent to the
local ARC DST group. The first class was last night, below
are the links for the remaining classes. Please call me (see
number below) if you have any problems.
NVITATION TO MOVE VIRTUAL OPERATIONS
CLASS SERIES
MOVE is offering a 3 part, Virtual,
Operations Class. This class is required for everyone
interested in deploying on the MOVE truck or has a general
interest in the program. It is required for new MOVE
members and recommended as a refresher for those that have
previously taken it. We discuss what to expect when
deploying, what equipment is on the MOVE truck, and
several safety procedures when working around the truck.
This is a virtual class that is broken up into 3 required
2 hour sessions. Now that MOVE has two trucks, differences
between the trucks will be discussed. If you took this
class previously, there will be new material due to the
2nd truck differences. This is a 3 part virtual class.
Agenda
Part 1: 13 Sept 2022 from
8:00-10:00 PM ET - https://events.vtools.ieee.
org/m/322035
Part 2: 20 Sept 2022 from
8:00-10:00 PM ET - https://events.vtools.ieee.
org/m/322096
Part 3: 27 Sept 2022 from
8:00-10:00 PM ET - https://events.vtools.ieee.
org/m/322097
Please use the above links to register for
all three training sessions
*There will be a test after the third session
- material will be provided for the test. *
Regards;
IEEE-USA MOVE Communications Team
Bill Torre
619-417-9410
On Tuesday, September 13, 2022 at 08:22:47 PM PDT,
Briggs, Danny via groups.io
<danny.briggs@...> wrote:
Same results here poor audio quality and boring. The
presentation delivery was conducted in a monotone voice.
Maybe part II will be better. DB
Again I didn't have any trouble
understanding him. Maybe the recording will be
better but it's doubtful.
Steve
On
Tue, Sep 13, 2022 at 6:59 PM Bruce < wa6dnt@...>
wrote:
Finally found where the link was buried,
and got in.
Then I could not understand the speaker as
his audio was so muddy and muffled- there were
NO high frequencies. I ran the audio thru my
mixer with the EQ at MAX for the hi
frequencies but it did not help much. Now its
water under the bridge.
73 Bruce WA6DNT.
On 9/13/2022 5:48 PM, Steve wrote:
:( It worked for me. It took
me to a page where it said to register (?)
as Guest and I entered name and email. It
is also being recorded.
Steve
I had a similar and frustrating
experience. I’ll help them if I can but
my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce
<wa6dnt@...>
wrote:
>
> I joined IEEE and registered for
these classes some time ago - I clicked
on the links they sent and all it does is
take me to the -registration page.
>
> I found no usable link that will get
me into the current ongoing class.
>
> When I signed up for IEEE membership,
I found it was a multi stage difficult
process.
>
> This site must have been constructed
by engineers for engineers only. Why do
they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
--
--
CAUTION: This email originated
from outside of the organization. Do not click links
or open attachments unless you recognize the sender
and know the content is safe.
|
|
|
Steve K W6SJK
Bill,
I think the confusion MIGHT have been that (going from memory) it asks you to sign in to WebEx if you have an account, or continue as a guest. I used the guest option.
Steve W6SJK
On Wed, Sep 14, 2022 at 11:28 AM Bill W9QEM < wtorre@...> wrote:
I am sorry that you have had trouble attending the IEEE MOVE Operations training classes. I had thought that the registration links had been sent to the local ARC DST group. The first class was last night, below are the links for the remaining classes. Please call me (see number below) if you have any problems.
NVITATION TO MOVE VIRTUAL OPERATIONS CLASS SERIES MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. Agenda Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - https://events.vtools.ieee. org/m/322035 Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - https://events.vtools.ieee. org/m/322096 Part 3: 27 Sept 2022 from 8:00-10:00 PM ET - https://events.vtools.ieee. org/m/322097 Please use the above links to register for all three training sessions *There will be a test after the third session - material will be provided for the test. * Regards; IEEE-USA MOVE Communications Team 
Bill Torre 619-417-9410
Same results here poor audio quality and boring. The presentation delivery was conducted in a monotone voice. Maybe part II will be better. DB
Again I didn't have any trouble understanding him. Maybe the recording will be better but it's doubtful.
Steve
On Tue, Sep 13, 2022 at 6:59 PM Bruce < wa6dnt@...> wrote:
Finally found where the link was buried, and got in.
Then I could not understand the speaker as his audio was so muddy and muffled- there were NO high frequencies. I ran the audio thru my mixer with the EQ at MAX for the hi frequencies but it did not help much. Now its water under the bridge.
73 Bruce WA6DNT.
On 9/13/2022 5:48 PM, Steve wrote:
:( It worked for me. It took me to a page where it said to register (?) as Guest and I entered name and email. It is also being recorded.
Steve
I had a similar and frustrating experience. I’ll help them if I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...> wrote:
>
> I joined IEEE and registered for these classes some time ago - I clicked on the links they sent and all it does is take me to the -registration page.
>
> I found no usable link that will get me into the current ongoing class.
>
> When I signed up for IEEE membership, I found it was a multi stage difficult process.
>
> This site must have been constructed by engineers for engineers only. Why do they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
--
--
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
|
|
|
I am sorry that you have had trouble attending the IEEE MOVE Operations training classes. I had thought that the registration links had been sent to the local ARC DST group. The first class was last night, below are the links for the remaining classes. Please call me (see number below) if you have any problems.
NVITATION TO MOVE VIRTUAL OPERATIONS CLASS SERIES MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. Agenda Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - https://events.vtools.ieee. org/m/322035 Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - https://events.vtools.ieee. org/m/322096 Part 3: 27 Sept 2022 from 8:00-10:00 PM ET - https://events.vtools.ieee. org/m/322097 Please use the above links to register for all three training sessions *There will be a test after the third session - material will be provided for the test. * Regards; IEEE-USA MOVE Communications Team
Bill Torre 619-417-9410
On Tuesday, September 13, 2022 at 08:22:47 PM PDT, Briggs, Danny via groups.io <danny.briggs@...> wrote:
Same results here poor audio quality and boring. The presentation delivery was conducted in a monotone voice. Maybe part II will be better. DB
From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Steve <stevew6sjk@...>
Sent: Tuesday, September 13, 2022 7:28:08 PM
To: main@arc2-sdicc.groups.io <main@arc2-sdicc.groups.io>
Subject: [EXTERNAL] Re: [ARC2-SDICC] Well I tried = no way to get into the IEEE class
Again I didn't have any trouble understanding him. Maybe the recording will be better but it's doubtful.
Steve
On Tue, Sep 13, 2022 at 6:59 PM Bruce < wa6dnt@...> wrote:
Finally found where the link was buried, and got in.
Then I could not understand the speaker as his audio was so muddy and muffled- there were NO high frequencies. I ran the audio thru my mixer with the EQ at MAX for the hi frequencies but it did not help much. Now its water under the bridge.
73 Bruce WA6DNT.
On 9/13/2022 5:48 PM, Steve wrote:
:( It worked for me. It took me to a page where it said to register (?) as Guest and I entered name and email. It is also being recorded.
Steve
I had a similar and frustrating experience. I’ll help them if I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...> wrote:
>
> I joined IEEE and registered for these classes some time ago - I clicked on the links they sent and all it does is take me to the -registration page.
>
> I found no usable link that will get me into the current ongoing class.
>
> When I signed up for IEEE membership, I found it was a multi stage difficult process.
>
> This site must have been constructed by engineers for engineers only. Why do they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
--
--
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
|
|
|
Same results here poor audio quality and boring. The presentation delivery was conducted in a monotone voice. Maybe part II will be better. DB
From: main@ARC2-SDICC.groups.io <main@ARC2-SDICC.groups.io> on behalf of Steve <stevew6sjk@...>
Sent: Tuesday, September 13, 2022 7:28:08 PM
To: main@arc2-sdicc.groups.io <main@arc2-sdicc.groups.io>
Subject: [EXTERNAL] Re: [ARC2-SDICC] Well I tried = no way to get into the IEEE class
Again I didn't have any trouble understanding him. Maybe the recording will be better but it's doubtful.
Steve
On Tue, Sep 13, 2022 at 6:59 PM Bruce < wa6dnt@...> wrote:
Finally found where the link was buried, and got in.
Then I could not understand the speaker as his audio was so muddy and muffled- there were NO high frequencies. I ran the audio thru my mixer with the EQ at MAX for the hi frequencies but it did not help much. Now its water under the bridge.
73 Bruce WA6DNT.
On 9/13/2022 5:48 PM, Steve wrote:
:( It worked for me. It took me to a page where it said to register (?) as Guest and I entered name and email. It is also being recorded.
Steve
I had a similar and frustrating experience. I’ll help them if I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...> wrote:
>
> I joined IEEE and registered for these classes some time ago - I clicked on the links they sent and all it does is take me to the -registration page.
>
> I found no usable link that will get me into the current ongoing class.
>
> When I signed up for IEEE membership, I found it was a multi stage difficult process.
>
> This site must have been constructed by engineers for engineers only. Why do they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
--
--
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
|
|
|
Steve K W6SJK
Again I didn't have any trouble understanding him. Maybe the recording will be better but it's doubtful.
Steve
On Tue, Sep 13, 2022 at 6:59 PM Bruce < wa6dnt@...> wrote:
Finally found where the link was
buried, and got in.
Then I could not understand the speaker
as his audio was so muddy and muffled- there were NO high
frequencies. I ran the audio thru my mixer with the EQ at MAX for
the hi frequencies but it did not help much. Now its water under
the bridge.
73 Bruce WA6DNT.
On 9/13/2022 5:48 PM, Steve wrote:
:( It worked for me. It took me to a page where
it said to register (?) as Guest and I entered name and email.
It is also being recorded.
Steve
I
had a similar and frustrating experience. I’ll help them if
I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...>
wrote:
>
> I joined IEEE and registered for these classes some
time ago - I clicked on the links they sent and all it does is
take me to the -registration page.
>
> I found no usable link that will get me into the current
ongoing class.
>
> When I signed up for IEEE membership, I found it was a
multi stage difficult process.
>
> This site must have been constructed by engineers for
engineers only. Why do they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
--
|
|
|
Fred Curtis, KI6GRO
I thought I was the only one with bad audio. I downloaded the slides if anyone wants them.
73 de KI6GRO
On Tue, Sep 13, 2022 at 6:59 PM Bruce < wa6dnt@...> wrote:
Finally found where the link was
buried, and got in.
Then I could not understand the speaker
as his audio was so muddy and muffled- there were NO high
frequencies. I ran the audio thru my mixer with the EQ at MAX for
the hi frequencies but it did not help much. Now its water under
the bridge.
73 Bruce WA6DNT.
On 9/13/2022 5:48 PM, Steve wrote:
:( It worked for me. It took me to a page where
it said to register (?) as Guest and I entered name and email.
It is also being recorded.
Steve
I
had a similar and frustrating experience. I’ll help them if
I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...>
wrote:
>
> I joined IEEE and registered for these classes some
time ago - I clicked on the links they sent and all it does is
take me to the -registration page.
>
> I found no usable link that will get me into the current
ongoing class.
>
> When I signed up for IEEE membership, I found it was a
multi stage difficult process.
>
> This site must have been constructed by engineers for
engineers only. Why do they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
--
|
|
|
Finally found where the link was
buried, and got in.
Then I could not understand the speaker
as his audio was so muddy and muffled- there were NO high
frequencies. I ran the audio thru my mixer with the EQ at MAX for
the hi frequencies but it did not help much. Now its water under
the bridge.
73 Bruce WA6DNT.
On 9/13/2022 5:48 PM, Steve wrote:
toggle quoted message
Show quoted text
:( It worked for me. It took me to a page where
it said to register (?) as Guest and I entered name and email.
It is also being recorded.
Steve
I
had a similar and frustrating experience. I’ll help them if
I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...>
wrote:
>
> I joined IEEE and registered for these classes some
time ago - I clicked on the links they sent and all it does is
take me to the -registration page.
>
> I found no usable link that will get me into the current
ongoing class.
>
> When I signed up for IEEE membership, I found it was a
multi stage difficult process.
>
> This site must have been constructed by engineers for
engineers only. Why do they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
--
|
|
|
Steve K W6SJK
:( It worked for me. It took me to a page where it said to register (?) as Guest and I entered name and email. It is also being recorded.
Steve
I had a similar and frustrating experience. I’ll help them if I can but my focus will remain with the Red Cross.
> On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...> wrote:
>
> I joined IEEE and registered for these classes some time ago - I clicked on the links they sent and all it does is take me to the -registration page.
>
> I found no usable link that will get me into the current ongoing class.
>
> When I signed up for IEEE membership, I found it was a multi stage difficult process.
>
> This site must have been constructed by engineers for engineers only. Why do they make it so hard?
>
> 73 Bruce WA6DNT@...
>
>
>
>
>
>
|
|
|
Dan Hober
I had a similar and frustrating experience. I’ll help them if I can but my focus will remain with the Red Cross.
toggle quoted message
Show quoted text
On Sep 13, 2022, at 5:20 PM, Bruce <wa6dnt@...> wrote:
I joined IEEE and registered for these classes some time ago - I clicked on the links they sent and all it does is take me to the -registration page.
I found no usable link that will get me into the current ongoing class.
When I signed up for IEEE membership, I found it was a multi stage difficult process.
This site must have been constructed by engineers for engineers only. Why do they make it so hard?
73 Bruce WA6DNT@...
|
|
|
I joined IEEE and registered for these classes some time ago - I clicked on the links they sent and all it does is take me to the -registration page.
I found no usable link that will get me into the current ongoing class.
When I signed up for IEEE membership, I found it was a multi stage difficult process.
This site must have been constructed by engineers for engineers only. Why do they make it so hard?
73 Bruce WA6DNT@...
|
|
|
