FW: Anytone 587 UV III PRO Transmit power


Gary Kent
 

I got the following request from a ham in Sydney Australia and I thought I would forward the results.

 

From: Gary Kent [mailto:gary.kent@...]
Sent: Sunday, November 1, 2020 3:25 PM
To: 'Richard@...'
Subject: RE: Anytone 587 UV III PRO

 

Richard,

 

I just did some power measurements on my Anytone 578 and the results are as follows (using a Bird 43 wattmeter,  a 13.8 VDC power supply and  FM modulation)

 

146.19 MHZ  L (low)  2 watts

                          M (Mid) 14 watts

                          H (High) 25 watts

                          T (Turbo) 60 watts

222.8 MHz   L =1.5 watts

                        M = 5 watts

                        H  = 5 Watts

                        T = 5 Watts

 

442.000 MHz   L =1 watt

                             M= 7 watts

                             H = 20 watts

                             T = 40 watts.

 

 

Hope this helps.

 

73 DE W6GDK

Gary Kent

 

From: Richard [mailto:Richard@...]
Sent: Saturday, October 31, 2020 10:27 PM
To: w6gdk@...
Subject: Anytone 587 UV III PRO

 

Grretings gary, this is VK2CRB from Sydney.

 

Read your reviews from eHam regarding the Anytone radio. Bridgecom would not have the professional courtesy to answer some questions, I thought quite appalling but such is life.

 

I wonder, if you own one, that I could ask you if you have measured the power output and how much truth the Chinese are telling. I just sold my TYT MD 9600 as the 50 Watts turned up to be only 38. And measuring the FT 991A in the same VHF FX with same antenna and cable, I measured 52..............so that tells something?

Not sure if Anytone might be a bit better and I can imagine that the RX front end would not have filtering either. 

I sell commercial Motorola radios in Australia, and yes, I know there is a difference but TYT made me go backwards in trusting anything from China.

 

Thanks and hope you do not mind me asking this.

 

73's

 

VK2CRB

 

-- 

Richard Benfatto

 

0434 747 908

 

 


Bob Birch
 

Thanks Gary,

Think I will go with the part 90 radio and deal with 220 separately.

Bob


-------- Original message --------
From: Gary Kent <gary.kent@...>
Date: 11/1/20 3:31 PM (GMT-08:00)
To: main@ARC2-SDICC.groups.io
Subject: [ARC2-SDICC] FW: Anytone 587 UV III PRO Transmit power

I got the following request from a ham in Sydney Australia and I thought I would forward the results.

 

From: Gary Kent [mailto:gary.kent@...]
Sent: Sunday, November 1, 2020 3:25 PM
To: 'Richard@...'
Subject: RE: Anytone 587 UV III PRO

 

Richard,

 

I just did some power measurements on my Anytone 578 and the results are as follows (using a Bird 43 wattmeter,  a 13.8 VDC power supply and  FM modulation)

 

146.19 MHZ  L (low)  2 watts

                          M (Mid) 14 watts

                          H (High) 25 watts

                          T (Turbo) 60 watts

222.8 MHz   L =1.5 watts

                        M = 5 watts

                        H  = 5 Watts

                        T = 5 Watts

 

442.000 MHz   L =1 watt

                             M= 7 watts

                             H = 20 watts

                             T = 40 watts.

 

 

Hope this helps.

 

73 DE W6GDK

Gary Kent

 

From: Richard [mailto:Richard@...]
Sent: Saturday, October 31, 2020 10:27 PM
To: w6gdk@...
Subject: Anytone 587 UV III PRO

 

Grretings gary, this is VK2CRB from Sydney.

 

Read your reviews from eHam regarding the Anytone radio. Bridgecom would not have the professional courtesy to answer some questions, I thought quite appalling but such is life.

 

I wonder, if you own one, that I could ask you if you have measured the power output and how much truth the Chinese are telling. I just sold my TYT MD 9600 as the 50 Watts turned up to be only 38. And measuring the FT 991A in the same VHF FX with same antenna and cable, I measured 52..............so that tells something?

Not sure if Anytone might be a bit better and I can imagine that the RX front end would not have filtering either. 

I sell commercial Motorola radios in Australia, and yes, I know there is a difference but TYT made me go backwards in trusting anything from China.

 

Thanks and hope you do not mind me asking this.

 

73's

 

VK2CRB

 

-- 

Richard Benfatto

 

0434 747 908